Home > MCUs & Shields > Arduino-Compatible >

Xboard v2 (Arduino-compatible)

Xboard v2 (Arduino-compatible)

Alternative Views:

Our Price: $30.00

Stock Status:In Stock

Product Code: DFR0162

This is Version 2.0 of the XBoard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol with out the need of a voltage level converter. 

The XBoard is a unique Arduino-compatible board which features a WIZnet ethernet port (same ethernet chip as the official Arduino Ethernet boards), an XBee socket, and an ATMega328.  This board will add wireless XBee control as well as Internet connectivity to your projects, all on a small board. 

It has 8 Analog I/O pins and 8 digital pins, 4 of which have PWM (indicated by an asterisk on the PCB).  It is compatible with all XBee modules, and also comes with an integrated socket for APC220 RF Module or DF-Bluetooth Module.  The XBoard can be programmed via an FTDI programmer or via the ICSP header.  Power is provided through a Mini USB connector.   With this board, you can quickly add sensors, connect to Cosm, and post your data with additional shields, or a PC.

The board requires FTDI basic board to upload sketches.

  • Atmega328P low voltage version (16Mhz)
  • Ethernet: WIZ5100
  • Arduino Uno bootloader
  • Supply voltage: 5~12v
  • Output voltage: 5v/3.3v
  • Digital IO: 8
  • Analog In: 8
  • Envionment Friendly: Rohs Compliance
On-board LEDs:
  • PWR: indicates that the board and shield are powered
  • LINK: indicates the presence of a network link and flashes when the shield transmits or receives data
  • FULLD: indicates that the network connection is full duplex
  • 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s)
  • RX: flashes when the shield receives data
  • TX: flashes when the shield sends data
  • COLL: flashes when network collisions are detected
  Package Contains:
  • X-Board V2 (1 unit)

USB Serial Light Adapter (Arduino Compatible FTDI Breakout)
Our Price: $12.50
USB Serial Light Adapter (Arduino Compatible FTDI Breakout)

Share your knowledge of this product. Be the first to write a review »