Home > Robotics >

DFRduino Pro Mini v1.3 (16M5V328)

DFRduino Pro Mini v1.3 (16M5V328)

Alternative Views:

Our Price: $14.00

Stock Status:In Stock

Product Code: DFR0159

The 5V DFduino Pro Mini v1.3(Arduino Pro Mini Compatible)  is a microcontroller board based on the ATmega328.  It is a 5V DFduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino IDE).
It is an advanced version of official Arduino Pro Mini.  The DFRduino Pro mini has 8 analog inputs compared with official's 6.  The rest of the bits are exactly the same.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers.  A 6-pin header can be connected to an FTDI cable or DFRobot breakout board to provide USB power and communication to the board.
The DFRduino Pro Mini is intended for semi-permanent installation in projects.  The board comes without pre-installed headers, allowing the use of various types of connectors or direct soldering of wires.  The pin layout is compatible with the Arduino Mini.
USB Serial Light Adapter (Arduino Compatible) can be used to program your Pro Mini board.
  • DC input 5V up to 8V (power supply from RAW pin)
  • DC input 5V (from VCC pin)
  • Bootloader: Arduino Pro/Pro Mini (5V, 16Mhz) w/ ATmega328
  • 5V regulator
  • Max 150mA output
  • ATmega328 running at 16MHz with external resonator (0.5% tolerance)
  • Low-voltage board needs no interfacing circuitry for popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
  • USB connection off board
  • Supports auto-reset
  • Over current protected
  • Reverse polarity protected
  • On board Power and Status LEDs
  • Size: 0.7x1.3" (18x33mm)

Share your knowledge of this product. Be the first to write a review »