Home > Robotics >

Makeblock Constructor 3D Printer Kit
Makeblock Constructor 3D Printer Kit


 
Our Price: $699.99

Stock Status:(Out of Stock)

Product Code: MB-90016
Qty:

Description
 


Description:


The Makeblock Constructor I 3D Printer DIY Kit
is an open source 3D printer based on the Prusa i3 aluminum frame 3D printer kit. The original inspiration for this kit is from the open source community where there was a strong desire from the makers to use Makeblock Aluminium mechanical parts to build the frame for a 3D printer. With matching electronics (RAMPS1.4 shield, Arduino Mega2560 compatible board) and software (Slic3r,Printrun), you can get high-quality prints and extreme precision: XY Resolution: 0.1mm, Layer Resolution: 0.1-0.3mm. Since this kit is based on the popular Prusa design, there is a lot of community support and knowledge that would directly apply to this kit.


What can you use Constructor I for?


Makeblock Constructor I 3D Printer DIY Kit is very capable, and can service many of your Maker needs. No matter if you are a designer, engineer, educators or inventor, you can bring your ideas to life by printing out objects for rapid prototyping, building models, house hold articles, phone cases, toys, and mechanical parts to build your robots. A great starting point is to look at what is on thingiverse.com and see if someone has already created something you'd like to use.


What does Constructor I feature?


Open source

  • Constructor I is open source. The electronics we are using are from the reference design, and is well-documented and supported by the community.
  • The aluminum frames, brackets and plates are based on Makeblock platform, which means strong extensibility so you can upgrade and modify your 3D printers or use mechanical parts to build some other robots without buying some extra parts or electronics.

Accurate

  • 1.75mm PLA filament and a 0.4mm nozzle to get a layer resolution of 0.1~0.3mm.
  • XY platform is uses precise linear motion shaft (8mm, length 312mm), timing pulleys, the Z axis uses a thread rod to ensure the accuracy.

Reliable

  • The Constructor I frame is made of anodized extruded aluminum. All beams, brackets, plates are based on aluminum material, and this provide a frame that is rigid and strong. These precision parts make the platform stronger, and and more accurate than the units that are made of lesser materials.

Easy to use

  • Detailed tutorials including teaching videos and assembly instruction help you complete the structure easily and are perfect for education.
  • Based on open source software, you can get started quickly with detailed instructions.
  • Gradienter is included for you to adjust the XY print platform to level easily.

What's included in the Kit Constructor I ?


It contains everything you need to build your 3D printer.

  • Aluminum frame (color: blue), not plastic parts.
  • Precise linear motion shaft (Diameter: 8mm, length: 312mm)
  • 42BYG Stepper Motors, wires etc.
  • Electronics including RAMPS1.4 shield, LCD, etc. (no soldering needed).
  • All other hardware required to build your own printer
  • 110-240 VAC (12V/10A) Power adapter is included.

Specification:


  • Frame: Anodized aluminum
  • Extruder: All metal, temperatures up to 250C degrees
  • Physical Dimensions: 324mm X 312mm X400mm
  • Print Materials: 1.75mm PLA
  • Build Volume (WxDxH): 125mm x 165mm x 120mm
  • XY Resolution: 0.1mm
  • Layer Resolution: 0.1-0.3mm
  • Print Bed: Not heated
  • Speed: Print speed general 40mm/s, max 100mm/s
  • Power: 110-240 VAC Power adapter, 12V/10A
  • Software: Slic3r+Printrun, Cura, kisslicer, MatterControl, Skeinforge
  • Firmware: Marlin
  • LCD shows useful information about the progress of the print
  • Supports file type: STL
  • Connections: USB & SD Card
  • Electronics: RAMPS1.4 shield + Mega2560 compatible board







Download:

Please visit the link to download the software and assembly instruction.

Assembly instruction download

Software download



Share your knowledge of this product. Be the first to write a review »