Home > Sensors, Components & Modules > LEDs & Displays >

IT-24LCDSHIELD



 
Our Price: $28.00

Stock Status:In Stock

Product Code: IT-24LCDSHIELD
Qty:

Description
 

Overview

The Arduino 2.4" TFT LCD Touch shield is an Arduino UNO/ Mega compatible multi-colored TFT display with touch-screen and a SD card socket.  The TFT driver is based on the S6D112 chip with 8bit data and 4bit control interface. 

The Arduino 2.4" TFT LCD Touch shield can work with both 3.3V and 5V, so it can be used on Chipkit UNO32, Simplecortex, and other microcontrollers that accept Arduino shields and require 3.3V logic.




Features

  • Arduino UNO Rev3 / Mega Shield compatible footprint 
  • Arduino library UTFT support (demo code, link at bottom of page)
  • TFT Screen Resolution: 240 x 320 pixels
  • Size: 2.4"
  • Colors : 262K
  • Backlight: LED
  • Driver IC: S6D112




Hardware

Arduino 2.4 TFT shield

Arduino PIN

Description

D0

DB8

D1

DB9

D2

DB10

D3

DB11

D4

DB12

D5

DB13

D6

DB14

D7

DB15

D8

Touch_Dout

D9

Touch_IRQ

D10

SD_CS

D11

SD_MOSI

D12

SD_MISO

D13

SD_SCK

A0

Touch_Din

A1

Touch_CLK

A2

-

A3

TFT_CS

A4

TFT_WR

A5

TFT_RS

Note

Note: This shield is 100% compatible with ITeaduino, Simplecortex, and other Arduino boards (Freetronics, Seeeduino, etc) that do not use the giant type "B" USB connector.  The Uno uses the type "B" USB connector, and it does not fit w/o stacking headers.  Also, please be aware that these types of touch display shields use nearly every pin on a standard Arduino.   You may wish to use a Mega with this shield.


2.4 not compatible

Samsung S6D1121 Datasheet
Product Datasheet
Arduino Demo Code
Schematic

Share your knowledge of this product. Be the first to write a review »