MCUs & Shields
Sensors, Components & Modules
Add ethernet to the Due for $16
Analog IR Temperature Gauge
Intro to 3-Axis Accelerometer
Mini Slideshow using OLED
Ultrasonic Range Sensor Fun
Site Help / FAQ
Shopping Cart Software
MCUs & Shields
Stock Status:In Stock
The "Eleven" is just like an Arduino Uno – but better!
It is based on the existing Arduino Uno but with improvements and updates for ease of use, cost and getting started.
It's 100% Arduino compatible. Also included in the package are a USB cable, and our Getting Started guide sheet.
As well as the
standard Arduino Uno features
, the Eleven has the following improvements and updates:
For those projects where you don't need the extra size or expense of a shield, the Eleven has its own standard prototyping area taking up a quarter of the board. Great for quick sensor and IC projects. There's extra power pads underneath for neat connections.
LEDs visible on the edge
Wondered what your Arduino was doing? We've carefully placed a nice blue Power LED, plus colour coded RX, TX and D13 LEDs on the right edge of the board so you can see what's going on.
We've provided proper crystals for both the primary MCU and the communications MCU, rather than using a ceramic resonator.
No more short circuits of the large USB connector against your shields. Our standard Mini-USB connector is firmly mounted and we've included a cable too.
Overlay guide where you need it
When you're soldering your project, it's good to know what you're connecting to! All of our boards and shields have a thorough pinout and guide printed on the bottom as well as the top, so when you're soldering underneath there's no need to flip the board over constantly.
Top spec MCU
Every Eleven has the top specification ATmega328P Microcontroller.
D13 pin works for everything
The digital I/O pin 13 functionality has been fixed, the D13 indicator LED no longer loads up this pin when you use it as an input.
Mounting holes and power jack
We've included a fourth mounting hole in the bottom left, there's no more wobbly board troubles if you're fitting it to a case.
Helpful markings for the Power Jack size, polarity and voltage are right there on the board when you need them. Auto-power switching and self-resetting fuse protection are standard.
It's all in the same place
The power jack, headers and ICSP are all in exactly the same location as Arduino standard boards. The Eleven is perfectly compatible with all Arduino shields, projects and sketches.
What's in the box?
Freetronics Eleven board
A Mini-USB cable so you don't need to purchase one separately!
Our carefully written Getting Started guide
Getting Started guide (pdf, 2.1MB
Installation of the inf driver file for Windows
Design files on GitHub
9VDC Regulated Wall Adapter Switching Power Supply
Freetronics 802.3af Power-over-Ethernet Module
PoE Power Regulator 28V
4-Channel Power-over-Ethernet Midspan Injector
Arduino Sidekick Basic Kit
MilCandy - The Easiest Grove Controller
Seeeduino Stalker v2.3
Iteaduino MEGA 2560
Seeeduino V3.0 (ATMega 328P)
Xboard v2 (Arduino-compat)
Freeduino USB Complete Kit
Seeeduino ADK Main Board
Share your knowledge of this product.
Be the first to write a review »
Terms & Conditions
Become an Affiliate
ALL RIGHTS RESERVED
Powered by Volusion